Legrand G-6012TX User Manual
Page 2
G-6012TX as 45° External Elbow…
Break off both sides of angle filler at
scoremarks. Assemble elbow cou-
plings, angle filler and end pieces in
positions shown by means of pan head
screws (furnished). Angle filler is
retained by flanges on end pieces.
Tighten all end piece screws securely
1
Assemble G-6000 raceway base sections on G-6012TX elbow couplings so as to abut elbow
end pieces and tighten locking screws. Notch G-6000 cover flanges as shown and bend
cover 45°. After conductors are in place, snap G-6000 cover into raceway base sections.
2
PAN HEAD SCREWS
(Furnished)
ELBOW
COUPLING
ELBOW
COUPLING
ANGLE FILLER
(RETAINED BY
END PIECES)
BREAK OFF BOTH
SIDES OF ANGLE
FILLER AT SCORES
END PIECE
END
PIECE
G-6012TX 45°
EXTERNAL ELBOW
G-6000 BASE
NOTCH FLANGES
G-6000 COVER
G-6000 COVER
SECTION
BEND COVER
45°
LOCKING
SCREWS
©1998 The Wiremold Company
29503R1 298
The Wiremold Company
60 Woodlawn Street
West Hartford, CT 06110
45° Min