Legrand DS4015 Tee Fitting User Manual
Page 3
Advertising
Cover Removal with 650RT
FITTING COVER REMOVAL – Fitting Cover can be removed using two methods:
Cover Removal with Screwdriver
Step 1. Locate Dimple on Fitting and use as guide to drill
3/16" [5mm] hole for Tamper Resistant Screw.
To make the Fittings fully tamper resistant, use part no. DSTRK.
Step 2. Install Tamper Resistant Screw through drilled hole in the
Cover into the tab with hole on the Fitting Base.
Step 3. Installation complete.
Advertising