Legrand DS4000 Elbow Fittings User Manual
Page 4
Wiremold / Legrand
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721
© Copyright 2006 Wiremold / Legrand All Rights Reserved
43268 – January 2006 – For latest specs visit www.wiremold.com
For more information, visit www.wiremold.com/ds4000.
Cover Removal with 650RT
FITTING COVER REMOVAL – Fitting Cover can be removed using two methods:
Cover Removal with Screwdriver
Step 1. Locate Dimple on Fitting and use as guide to drill
3/16" [5mm] hole for Tamper Resistant Screw.
To make the Fittings fully tamper resistant, use part no. DSTRK.
Step 2. Install Tamper Resistant Screw through drilled hole in the
Cover into the tab with hole on the Fitting Base.
Step 3. Installation complete.