Flat panel tv installation, Installation – Legrand WP1014-WH User Manual

Page 2

Advertising
background image

301 Fulling Mill road, suite g

Middletown, Pa 17057

(800) 321-2343

©2011 by Legrand. all rights reserved.

www.legrand.us/onq

Flat Panel TV Installation

3.

INsTallaTIoN

For Brush strap installation, trace the existing on-wall
product as a guide (Figure 1). If no on-wall product exists, use
the template included on the back of box housing the Legrand
Flat Panel tV connection Kit. after completing the outline,
cut holes for the product (Figures 2-4), run electrical cable
(Figure 5), and rewire the outlet.

Figure 1

Figure 3

Figure 4

Figure 5

Figure 2

next, insert the products into the rough-in holes and pull the HdMI
cable from the upper hole down to the lower one (Figure 6).

after you’re finished wiring the outlet, attach the wallplate (Figure 7)
and secure the box to the wall (Figure 8).

Finally, following the instructions provided by the manufacturer, attach
the mount to the wall and carefully hang the television (Figure 9).

Figure 8

Figure 9

Figure 7

Figure 6

Advertising
This manual is related to the following products: