Dimplex DF3215 - Manual (Page 11)

SET CLOCK
1. Press the ENTER button, the middle display flashes.
2. Use the direction buttons on the hand held remote to move the cursor to the clock
and press the ENTER button.
3. A day of the week will flash.
4. Use the left or right direction button to select the day of the week.
5. Press the up direction button and the hour display will flash.
6. Use the left or right direction button to select the hour.
7. Press the up direction button and the minute display will flash.
8. Use the left or right direction button to select the minute.
9. Press ENTER to return to the main menu.
SET TEMPERATURE
1. Press the ENTER button, the middle display flashes.
2. Use the direction buttons on the hand held remote to move the cursor to and press
ENTER.
3. Use the left or right direction button to select between °F and °C.
4. Press ENTER to return to the main menu.
FIRELIGHT
1. Press the Flame/Heat button to turn the Flame/Heat ON.
2. Press the ENTER button, the middle display flashes.
3. Use the direction buttons on the hand held remote to move the cursor to and press
ENTER.
4. Press the up direction button to turn the firelight ON, press the down direction
button to turn the firelight OFF.
5. Press ENTER to return to the main menu.
FLAME SPEED
1. Press the Flame/Heat button to turn the Flame/Heat ON.
2. Press the ENTER button, the middle display flashes.
3. Use the direction buttons on the hand held remote to move the cursor to and press
ENTER.
4. Repeatedly press the left or right direction buttons to decrease or increase the
flame speed.
NOTE
The bar graph located on the top of the display screen indicates the speed range of the
flame.
5. Press ENTER to return to the main menu.
Firelight
Occupancy Sensor
Temperature Setting
Heater Program Setting
Flame Speed
Slow Start/Fading
Embers
Purifire™
Child Lock
Light Dimmer/Ambient
Light Sensor
Set Clock
FIGURE 6
9