Legrand MRR2 - Manual (Page 6)

inStAllAtiOn
1. Locate the repeater in a central location, taking into consideration both the
horizontal and vertical space in the home. In a 2-story plus basement home, a
good position may be on the first floor atop a bookcase.
2. Plug the external power supply into a convenient 120 volt outlet, and connect
the power cord to the repeater’s power socket.
3. The status LED will light yellow, indicating that the unit is ready for
configuration.
Do not locate the MRR2 Wireless Repeater close to
any device that may cause interference or behind
large metal objects that can block radio reception.
Avoid fluorescent light fixtures, TV sets, computers,
refrigerators, microwave ovens, range hoods, safes, etc.
MRR2 Repeater
Power Supply
Status LED