Installation – Legrand MRP6 User Manual
Page 6
Advertising
inStAllAtiOn
1. Plug the Miro wireless lamp module into a convenient 15amp 120V grounded
receptacle.
2. Plug the lamp into the grounded 15amp outlet on the base of the lamp
module.
3. Check that the lamp is switched on by pressing the button on the lamp
module. If the light does not come on, put its switch in the on position, and
leave it there. If it still doesn’t come on, check the lamp.
inStAll in cOMpliAnce With All ApplicAble cOdeS &
StAndArdS. Failure to follow these instructions may cause
personal injury or equipment damage.
Plug-in Lamp
Module
Lamp
Advertising
This manual is related to the following products: