Drolet ECO-35 - Manual (Page 14)

14
c. If the temperature in the auger rises beyond a certain acceptable level, two high temperature switches located under and above auger housing
will stop the fuel feed system and a warning will appear.
CODE BEFORE RESETING TO RESET
H1, H2, H3
OR H4 Heat exchanger and/or exhaust system
is/are clogged. Refer to the owner’s manual
for maintenance procedures.
Press simultaneously for 2 seconds and
.
*** After 3 attempts, reset is no longer possible, call SBI technical support.
DAMPER OPERATION
CL
OS
E STOVE
OP
EN
Figure 14
Damper operation