LEI Electronics PLJOGBK Factory Reset - Manual

Factory Reset Instructions
ADDM-20121010
If, after successful initial pairing, your Jogger headset does not automatically pair
to your device after shutting down, it may need to be reset. To reset your Jogger
Headset to factory default, please follow these instructions:
1. Turn Jogger on in standby mode
(turned on and blue light flashing
every 10 seconds)
2. Press and hold the “Next” button
for 8 seconds until the indicator
flashes blue and red.
3. Then press and hold the
“Multi-Function” button for 4
seconds. You will hear a beep, and
the Jogger will shut down.
4. The Jogger has now been reset to
the factory default and when
powered on will pair automatically.
“Multi-Function”
button
“Next”
button