Louroe Electronics ASK-4 101DV - Manual (Page 7)

SPECIFICATIONS (Microphone - Model D-V)
Output impedance (mic only)
Frequency response
Current drain
Output
Supply voltage
600 unbalanced
40 Hz to 15 kHz ± 1 dB
10 mA
Line Level(0dBV, 600 W @ 1kHz)
12Vdc
Dimensions (face plate) 2¾”W x 4½”H
INSTALLATION AND OPERATING INSTRUCTIONS
IMPORTANT NOTICE
When this equipment is used as part of an audio
monitoring system, the law requires that the public
be given notice of AUDIO MONITORING ON THE
PREMISES. A decal notice is included with each
microphone shipped.
Federal Law References:
Federal Regulations, US Code, Title 18. Crime and
Criminal Procedure, Sec 2510.
AUDIO
MONITORING
On
These Premises
®
WARRANTY
LOUROE ELECTRONICS warrants that at the time of shipment products manufactured by LOUROE ELECTRONICS to be free of defects in material and workmanship.
Should a defect appear within one year (12 months) from date of shipment, LOUROE ELECTRONICS will, at its sole discretion, repair or replace the defective equipment.
This equipment shall not be accepted for repair or return without prior notification by LOUROE ELECTRONICS .
This warranty does not extend to any Louroe product that has been subjected to improper or incorrect installation, misuse, accident, or in violation of installation
instructions provided by LOUROE ELECTRONICS.
Returned shipments to LOUROE ELECTRONICS shall be at customer’s expense. LOUROE ELECTRONICS will return the equipment prepaid via best way.
®
®
®
®
®
®
Page 7 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
SPECIFICATIONS (Base Station - APR-1)
Input sensitivity (mic)
Monitor output power
Audio input impedance
Freq. response
0.78V
1W@8
10K
100 Hz to 10 kHz
Headphone impedance
Universal power supply
Dimensions
Weight
8 to 600
12 Vdc, 500 mA
8 ¼"L x 5 ¾”W x 1 ⅜"H
1 lb 6 oz
Weight (shipping) of kit 3 lbs
Audio line output impedance 600W or higher
ASK4_101-DV_inst 1/15