Lynx Studio LT-MADI - Manual (Page 25)

Page 22
9.1.2 Input Routing
Signals from MADI inputs can be routed to Aurora Analog and/or AES/EBU Outputs. The
Aurora will need to be configured for this routing scheme and will not operate this way in its
default state. Input routing can be set globally from the Aurora Remote Control software or from
the Aurora front panel.
Additionally, input routing can also be initiated by the user on a per-channel basis with the
Aurora Remote Control software.
9.1.2.1 Global Routing
Global routing is achieved from the Aurora Remote Control software or from the Aurora front
panel. From the front panel, the buttons labeled TO ANALOG OUT and TO DIGITAL OUT are
where appropriate routing would be established. Since the LT-MADI is an LSLOT device,
Choosing “LSLOT In” as the Source for TO ANALOG OUT would route signals from MADI
inputs to the Aurora’s Analog outputs. Choosing “LSLOT In” as the Source for TO DIGITAL
OUT would route signals from MADI inputs to the Aurora’s AES/EBU DIGITAL outputs.
This setting will be affected by the 16/32-channel mode states for an Aurora 16. In 32-channel
mode, MADI inputs 1-16 will route to Analog outputs 1-16. MADI inputs 17-32 would route to
Aurora Digital outputs 1-16.
In 16-channel mode, if the LT-MADI card is set to “ANALOG”, then signals sent to the 16
MADI inputs will be routed to the Aurora’s Analog outputs, and signals sent to the Aurora’s
Digital inputs will not. Conversely, if the LT-MADI card is set to “DIGITAL”, then signals sent
to the 16 Digital inputs will be routed to the MADI outputs, and signals sent to the Analog inputs
will not.
With an Aurora 8, MADI inputs 1-8 will be sent to the Aurora’s Analog outputs, and MADI
inputs 9-16 will be sent to the Aurora’s Digital outputs.
The following chart will detail global LT-MADI Input routing with the various configurations of
an Aurora 8 or Aurora 16
Unit
16/32
channel
mode
Digital or
Analog
mode
MADI
Inputs 1-8
Route to
MADI
Inputs 9-16
Route to
MADI
Inputs 17-
24 Route to
MADI
Inputs 25-
32 Route to
Aurora 16
32-Channel
Mode
N/A
Analog
Out 1-8
Analog
Out 9-16
Digital Out
1-8
Digital Out
9-16
Aurora 16
16-Channel
Mode
SW4 switch
= Analog
Analog
Out 1-8
Analog
Out 9-16
N/A N/A
Aurora 16
16-Channel
Mode
SW4 switch
= Digital
Digital
Out 1-8
Digital
Out 9-16
N/A N/A
Aurora 8 N/A N/A
Analog
Out 1-8
Digital
Out 1-8
N/A N/A