Denon AVR-1706 User Manual

Page 51

Advertising
background image

48

Additional Information

Additional Information

ENGLISH

Playback method

(reference page)

Dolby Digital output

terminals

Media

Dolby Pro Logic

Dolby Digital

Comparison of home

surround systems

[2] When not using surround back speakers

• Set the front speakers with their front surfaces as flush with

the TV or monitor screen as possible. Set the center speaker
between the front left and right speakers and no further from
the listening position than the front speakers.

• Consult the owner’s manual for your subwoofer for advice on

placing the subwoofer within the listening room.

• If the surround speakers are direct-radiating (monopolar), then

place them slightly behind and at an angle to the listening
position and parallel to the walls at a position 2 to 3 feet above
ear level at the prime listening position.

Surround

The AVR-1706 is equipped with a digital signal processing circuit
that lets you play program sources in the surround mode to
achieve the same sense of presence as in a movie theater.

[1] Dolby Surround

q

Dolby Digital

Dolby Digital is the multi-channel digital signal format developed
by Dolby Laboratories.
Dolby Digital consists of up to “5.1” channels – front left, front
right, center, surround left, surround right, and an additional
channel exclusively reserved for additional deep bass sound
effects (the Low Frequency Effects –LFE– channel, also called
the “.1” channel, containing bass frequencies of up to 120 Hz).
Unlike the analog Dolby Pro Logic format, Dolby Digital’s main
channels can all contain full range sound information, from the
lowest bass, up to the highest frequencies – 22 kHz. The signals
within each channel are distinct from the others, allowing
pinpoint sound imaging, and Dolby Digital offers tremendous
dynamic range from the most powerful sound effects to the
quietest, softest sounds, free from noise and distortion.

2

Dolby Digital and Dolby Pro Logic

No. of recorded

channels (elements)

No. of playback

channels

Playback channels

(max.)

Audio processing

High frequency

playback limit of

surround channel

5.1 ch

5.1 ch

L, R, C, SL, SR, SW

Digital discrete

processing Dolby
Digital encoding /

decoding

20 kHz

2 ch

4 ch

L, R, C, S

(SW – recommended)

Analog matrix

processing Dolby

Surround

7 kHz

2

Dolby Digital compatible media and playback
methods

Symbol indicating Dolby Digital compatibility:

The following are general examples. Also refer to the player’s
operating instructions.

1: Please use a commercially available adapter when

connecting the Dolby Digital RF output terminal of the LD
player to the digital input terminal.
Please refer to the instruction manual of the adapter when
making connection.

2: Some DVD digital outputs have the function of switching

the Dolby Digital signal output method between “bit
stream” and “(convert to) PCM”. When playing in Dolby
Digital surround on the AVR-1706, switch the DVD player’s
output mode to “bit stream”. In some cases players are
equipped with both “bit stream + PCM” and “PCM only”
digital outputs. In this case connect the “bit stream +
PCM” terminals to the AVR-1706.

w

Dolby Pro Logic

II

• Dolby Pro Logic

II

is a new multi-channel playback format

developed by Dolby Laboratories using feedback logic steering
technology and offering improvements over conventional Dolby
Pro Logic circuits.

• Dolby Pro Logic

II

can be used to decode not only sources

recorded in Dolby Surround (

) but also regular stereo sources

into five channels (front left, front right, center, surround left
and surround right) to achieve surround sound.

Subwoofer

Surround speakers

Front speakers

60°

Monitor

Center speaker

[ As seen from above ]

Front speaker

2 to 3 feet

[ As seen from the side ]

Surround speaker

120°

LD (VDP)

DVD

Others

(satellite broadcasts,

CATV, etc.)

Coaxial Dolby Digital

RF output terminal

1

Optical or coaxial

digital output

(same as for PCM)

2

Optical or coaxial

digital output

(same as for PCM)

Set the input mode to

“AUTO”

(

page 17, 18).

Set the input mode to

“AUTO”

(

page 17, 18).

Set the input mode to

“AUTO”

(

page 17, 18).

ENGLISH

Advertising