Marantz PM-14mkII - Manual (Page 7)

6
ENGLISH
REMOTE CONTROL OPERATION
(
Remote control unit: RC-17mk II PM)
The RC-17mk II PM remote control unit can control MARANTZ audio/
video components equipped with an infrared remote sensor as well as
other MARANTZ components which are connected with the above com-
ponents through the remote control bus. The following illustration shows
the button layout of the RC-17mk II PM.
Note that the functions of the PM-14mk II that can be remote controlled
are only the volume up/down control and input selection operations.
z Group of buttons for selecting the connected components
These buttons are used as the amplifier’s input selector.
x Group of buttons for controlling playback, etc.
These buttons are used to control the CD player, tape deck, etc.
c Group of numeric buttons
These buttons are used to enter figures for the tuner, CD player, etc.
v Group of amplifier (PM-14mk II ) control buttons
These buttons are used to control the listening volume.
Pressing a button in z (except PHONO) changes the functions of the
buttons in x and c to match the selected device. For the details, refer
to the following tables which show the function of the buttons for when
each of the buttons in
z is pressed.
Button functions when the TAPE 1 button (see z of the figure 3) is
pressed:
Button Function
Play
Fast forward
Rewind
Play direction change
Stop
OPEN/CLOSE Open/close (limited models only)
+ Deck A
– Deck B
Skip forward to next music
Skip backward to previous music
REPEAT Reverse mode
RANDOM Not used.
VOL Amplifier volume Up
VOL Amplifier volume Down
Button functions when the TAPE 2 button (see z of the figure 3) is
pressed:
Button Function
Play
Fast forward
Rewind
Play direction change
Stop
OPEN/CLOSE Open/close
+ Deck A
– Deck B
Skip forward to next music
Skip backward to previous music
REPEAT Not used.
RANDOM Not used.
VOL Amplifier volume Up
VOL Amplifier volume Down
REPEAT PHONO CD
RANDOM CD-R LINE 1/TUNER
+ / A TAPE LINE 2
− / B LINE 3
1 2 3
4 5 6
7 8 9
0
OPEN/CLOSE
VOLUME
Figure 3