D-Link DI-714 - Manual (Page 12)

12
For the average American multiple bedroom home, range should not be a
problem. If you experience low or no signal strength in areas of your
home that you wish to access, consider positioning the Access Point in a
location directly between the Routers and/or Computers that will be
connected. Additional Access Points can be connected to provide better
coverage in rooms where the signal does not appear as strong as desired.
Hardware Installation
Placement
The DI-714 Wireless Broadband Router should be placed in a safe and
secure location. To ensure proper operation, please keep the unit away
from water and other damaging elements.
Safety Precautions
Please read the installation guide thoroughly before you install the
DI-714.
The DI-714 should only be repaired by authorized and qualified
personnel.
Please do not try to open or repair the DI-714 yourself. Opening the
device will violate the products warranty.
Do not place the DI-714 in a damp or humid location, e.g. a bathroom.
The DI-714 should be placed in a sheltered and non-slip location
within a temperature range of 41 to 104 degrees Fahrenheit.
Please keep the plastic bag of the DI-714 and the clip binding the cable
out of reach of children and babies to avoid choking.
Please do not expose the DI-714 to direct sunlight or other heat
sources. The device’s housing and internal electronic components
may be damaged by direct sunlight or heat sources.