Denon AVR-2312CI - Manual (Page 11)

7
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Preparation
Playback
Setup Wizard
7
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Playback (Basic operation)
Here, we explain how to perform simple operations.
For details, see the included CD-ROM (Owner’s manual).
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Selecting the input source
Press the input source select button
( BD , SAT/CBL , TV , NET/USB , DVD ,
V.AUX , DOCK , TUNER , GAME1 ,
GAME2 , DVR or CD ) to be played
back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Using the knob on the main unit
Turn SOURCE SELECT .
• Turning SOURCE SELECT switches the input source, as shown
below.
BD DVD TV SAT/CBL
GAME1 GAME2 DVR V.AUX
CD TUNER
NET/USB DOCK
• When iPod 1 on the main unit is pressed, the input source
of this unit is switched to “DOCK” or “NET/USB” and the
connected iPod is automatically played (
vm page 32 “iPod
play function”).
n Using the “SOURCE SELECT” menu
Switch the remote control unit to the J (MAIN ZONE) mode
when performing this operation ( vm page 118 “Operating AV
device”).
If the remote control unit is in
K (ZONE2) mode, the “SOURCE
SELECT” menu will not be displayed when SOURCE SELECT is
pressed.
BD
Recent
Player
Video
Network
Tuner
SOURCE SELECT
Sourse
The currently selected input
source is highlighted.
q
w
e
q Input Source
The name of the highlighted input source is displayed.
w Recently used sources
The recently used input sources (up to five) are displayed.
e Icons for the input sources in the different categories are
displayed.
q Press SOURCE SELECT .
Display the “SOURCE SELECT” menu.
w Use uio p to select the input source,
then press ENTER .
The input source is set and the source
selection menu is turned off.
• When using with an iPod connected directly to the USB port of this
unit, select “ (USB/iPod)” for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” ( vm page 113).
• To turn off the source selection menu without selecting an input
source, press SOURCE SELECT again.
• When SOURCE SELECT is pressed, the AMP-operation mode starts
automatically ( vm page 118).
Selecting the input source