Marantz AV8801 Getting Started - Manual (Page 8)

7
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
• Do not turn on the Power Amplifi er (sold separately) before connecting it to the PRE OUT terminal on this AV Pre Tuner.
• When the following Setup Assistant message is displayed, turn on the connected Power Amplifi er.
Speaker Calibration
Back Next
Make sure your subwoofer is plugged in and turned on. If your
subwoofer has a volume control on it, please set it at 50%...
Then turn on the connected Power Amplifiers.
VOLUME POWER ON
OFF MIN MAX
n Turn on Power Amplifi er.
• Turn on the Power Amplifi er as shown below.
Power Amplifi er
1.AV8801U_GS_ENG_3rd_0924.indd 7 2012/09/24 13:10:17