Dodge 2008 Challenger SRT8 - Manual (Page 83)

To activate the UConnect
௡ system from idle, simply press
the PHONE button and follow the audible prompts for
directions. All UConnect
௡ system sessions begin with a
press of the PHONE button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say
ЉCancelЉ and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) UConnect
௡ System to a Cellular Phone
To begin using your UConnect ௡ system, you must pair
your compatible Bluetooth
௡ enabled cellular phone.
To complete the pairing process, you will need to refer-
ence your cellular phone Owner’s Manual. The
UConnect
௡ website may also provide detailed instruc-
tions for pairing.
The following are general phone to UConnect
௡ system
pairing instructions:
• Press the PHONE button to begin.
• After the ЉReadyЉ prompt and the following beep, say
ЉSetup Phone Pairing.Љ
• When prompted, after the beep, say ЉPair a PhoneЉ and
follow the audible prompts.
• You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
• For identification purposes, you will be prompted to
give the UConnect ௡ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81
3