Marantz CD6005 - Manual (Page 53)

53
Appendix Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Tips
2 USB memory devices cannot be played back
Symptom Cause/Solution Page
“No Device” is displayed. • This unit may not recognize the USB memory device due to poor connection, etc. Make sure
that the connection is made properly by taking actions such as disconnecting and reconnecting
the USB memory device.
• USB memory devices of a mass storage class are supported.
• This unit does not support a connection through a USB hub. Connect the USB memory device
directly to the USB port.
• The USB memory device must be formatted to FAT16 or FAT32.
• Not all USB memory devices are guaranteed to work. Some USB memory devices are not
recognized. When using a type of portable hard disc drive compatible with the USB connection
that requires power from an AC adapter, use the AC adapter that came with the drive.
19
–
–
–
–
Files on the USB memory device are
not displayed.
• Files of a type not supported by this unit are not displayed.
• This unit can display a file structure with up to 8 levels and up to 700 folders and up to 65,535
files. Modify the folder structure of the USB memory device.
• When multiple partitions exist on the USB memory device, only files on the first partition are
displayed.
55
–
–
Files on a USB memory device cannot
be played.
• Files are created in a format that is not supported by this unit. Check the formats supported
by this unit.
• You are attempting to play a file that is copyright protected. Files that are copyright protected
cannot be played on this unit.
55
–
2 File names on the iPod/USB memory device are not displayed properly
Symptom Cause/Solution Page
The file names are not displayed
properly (“...”, etc.).
• Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters
that cannot be displayed are replaced with a “.” (period).
–