7 switching the dab information display, 7 drc (dynamic range control), Operation – Marantz ST7001N User Manual
Page 27
23
ENGLISH
7 Switching the DAB information
display
1.
Follow steps 1 to 4 under “Tuning in DAB (Digital Audio
Broadcasting) broadcasts” (
☞
page 19) to tune in a
DAB station.
2.
Press the
DISPLAY
button
t
or
.
to switch the DAB
reception information.
• The display switches as shown below each time the
DISPLAY
button
t
or
.
is pressed.
q DLS
(Dynamic Label Segment) :
The text data included in the broadcast scrolls.
w Ensemble Name :
The ensemble name is displayed.
e PTY
(Program Type) :
The category of the broadcast being received is
displayed.
r Channel and Frequency :
The frequency is displayed.
t Audio Information :
The bit rate and mode of the broadcast being
received is displayed.
y Time and Date :
The current time and date are displayed.
u Bit Error Rate :
Noise may be generated and reception quality may
become poor at bit error rates above 0.05. If a rate
above 0.05 is displayed, move the antenna in
different directions to find a position where the rate
displayed is less than 0.05.
7 DRC (Dynamic Range Control)
• The DRC (Dynamic Range Control) function lets you
change the dynamic range of the received sound
depending on the content of the broadcast so that the
sound is easier to hear even when the volume is low.
1.
Press the
MENU
button
u
or
⁄2
to select menu.
2.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
to display the DRC
value mode selection screen.
3.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set the DRC value mode.
4.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
to choose the “DRC
ON” or “DRC OFF”.
DRC OFF:
DRC is switched off.
Any DRC level broadcast will be ignored.
This is the default setting.
DRC ON:
Applies DRC level as sent with the broadcast.
5.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set DRC function.
• This is effective when in a noisy environment and in
quiet sections of broadcast programs.
The broadcast’s DRC level is set at the broadcast station.
The DRC can be changed to achieve the optimum level.
OPERATION
REMOTE CONTROLLER
RC7001ST
SHIFT
R
E
EN
T
BAND
MENU
TUNING
CONTROL
CHANNEL/
A/B
C/D
E/F
TIMER
10
DISPLAY
DIMMER
9
8
7
4
5
6
3
2
T-MODE
I/J
G/H
SLEEP
MEMO
ON
STANDBY
1
/A-TUNE
A-PRESET
⁄2
⁄4
v
.
PUSH ENTER
PUSH ENTER
TUNING/PRESET
TUNING/PRESET
STEREO
STEREO
RDS
RDS
TUNED
TUNED
SECONDARY
SECONDARY
BAND SELECT
BAND SELECT
AUTO TUNE
AUTO TUNE
MENU
MENU
DISPLAY
DISPLAY
DIMMER
DIMMER
STANDBY
STANDBY
ON/STANDBY
ON/STANDBY
POWER
POWER
DAB/FM/AM TUNER ST7001
DAB/FM/AM TUNER ST7001
u
!4
t
ST7001N 01 Eng 05.7.21 5:24 PM ページ23