D-Link DI-707P - Manual (Page 30)

-30-
B.2 Set TCP/IP Protocol for Working with the DI-707P
1. Go to Start > Settings , then click Control Panel.
2. Double click the Network icon. Select the TCP/IP line that has been
associated to your network card in the Configuration tab of the Network
window.
3. Click the Properties button to set the TCP/IP protocol for the DI-707P.
4. You have two ways of setting the TCP/IP. First, by obtaining an IP address
automatically and second, by specifying a static IP address:
A. Obtaining an IP address automatically from the DHCP server (also
called a “dynamic IP address.”)