Dazzle Multimedia Universal TV Photo Show - Manual (Page 60)

5-7
Disconnecting Universal TV Photo Show
When you are done working with Universal TV Photo Show on your computer,
you can disconnect the unit. Make sure that you take out the memory card
before transporting the unit anywhere.
To disconnect Universal TV Photo Show:
1. Close all of the files on the card.
2. Check that the light on the front of the unit is not blinking. It blinks when it is
accessing files.
3. If you are using Windows 98SE, ME, 2000 or XP, right click on the removable
drive and select Eject. If you are using a Macintosh, eject or unmount your
memory card by dragging the card’s disk icon into the trash.
4. Unplug the USB connector cable.
5. Slide the switch on the side of the unit to OFF.
6. Remove your memory card from the unit.