Dodge 2009 Caliber User Manual
Page 46
Advertising
2. Grasp the mini-latch plate and pull the belt over the
seat.
3. Route the shoulder belt to the inside of the right head
restraint.
4. When the belt is long enough to fit, insert the mini-
latch plate into the mini-buckle until you hear a “click.”
5. Sit back in seat. Slide the regular latch plate up the
webbing as far as necessary to allow the belt to go around
your lap.
Routing the Rear Center Shoulder Belt
Routing the Rear Center Shoulder Belt
44
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Advertising
This manual is related to the following products: