Automatic transaxle (cvt) - if equipped, Automatic transaxle (cvt) — if equipped – Dodge 2009 Caliber User Manual

Page 363

Advertising
background image

Use only brake fluid that has been in a tightly closed
container to avoid contamination from foreign matter.

NOTE:

Do not allow petroleum-based fluid to contami-

nate the brake fluid as seal damage will result!

Automatic Transaxle (CVT) — If Equipped

Selection Of Lubricant
It is important that the proper lubricant is used in the
transaxle to assure optimum transaxle performance. Use
only the manufacturer’s recommended transmission
fluid which has been formulated with special metal to
metal friction coefficient additives to provide the proper
steel belt traction on the drive and driven pulleys. Refer
to “Fluids, Lubricants, and Genuine Parts” in this section
for the correct fluid type.

CAUTION!

Using a transmission fluid other than the manufac-
turer’s recommended fluid will cause belt slip and
result in a complete transmission failure! Refer to
“Fluids, Lubricants, and Genuine Parts” in this sec-
tion for the correct fluid type.

Fluid Level Check
The fluid level in the automatic transaxle should be
checked only by a trained technician.

Fluid And Filter Changes
Refer to the “Maintenance Schedule” in Section 8 for the
correct maintenance interval.

Special Additives
Do not add any materials (other than leak detection dyes)
to

Continuously

Variable

Transaxle

(CVT)

Fluid

MAINTAINING YOUR VEHICLE

361

7

Advertising
This manual is related to the following products: