Dual XDVD8281 - Manual (Page 24)

XDVD8281 OPERATION
3
SCREEN Setup - Menu
Screen Setup Menu
System Standby
Press SCREEN icon to access the SCREEN setup mode.
Select desired parameter you wish to change.
Page will return back to previous screen after 15 seconds of inactivity or by
pressing the RETURN button.
SCREEN Setup Menu matrix
To conserve the LCD backlight lifespan and eliminate glare while night driving,
press STANDBY. The TFT screen will turn off (black out), however all other
operations continue to operate. Press any button except VOLUME, or touch the
screen again to return to normal viewing.
•
•
•
L
L
Settings Default Options Function
Brightness 10 0 - 0
Press  or  on the remote or press the rotary once and
rotate clockwise/counter-clockwise to adjust the Brightness to
the desired setting
Screen Tilt 4 1 - 6 Select 1 to 6 to adjust the default tilt angle of the screen
Screen Saver On Off Select On to activate the screen saver, Off to deactivate
On
TS Calibrate No No Touch Yes to enter the Touch Screen calibration mode
Yes
Version Software version of unit