Maytag MDB6650AWW Dimension Guide - Manual

35 1/4" Maximum
33 3/4" Minimum Height at 0" leg adjustment:
Height at full leg adjustment:
Plumbing and
electrical service
must enter inside
shaded area
7" from floor
24" Minimum
24" Minimum
5" from
back wall
34" - 35"
underside of
countertop
to floor
Rough-in Information
(Not to Scale)
8"
5"
3"
Wall area
must be free
of pipes and
wires
23 7/8" Width:
Vertical toe space:
Depth with door open:
Door thickness incl. control panel:
Custom panel flange width:
Custom panel flange depth:
5/16"
1/4"
3" to 4 1/4"
48 1/2"
2"
23 1/2"
23 7/8"
48 1/2"
2" 23 1/2"
3" to 4 1/4"
1/4" Panel Size:
23 11/16" wide
X
4 5/8" high
1/4" Panel Size:
23 9/16" wide
X
18 3/16" high
Depth:
Side View
(not to scale)
Front View
(not to scale)
35 1/4" Maximum
33 3/4" Minimum
35 1/4" Maximum
33 3/4" Minimum
1 1/2"
1 1/2"
Door thickness:
DRAIN:
• 32" Drain loop, 1/2" minimum I.D. Floor drains require
a siphon break.
• Drain hose extension kit available 904024.
• When draining into a disposer, make sure disposer
drain plug is removed.
WATER SUPPLY:
• 15 to 120 psi water pressure. 120°F to 140° hot water
supply recommended.
• Access for manual shut-off valve recommended.
• 3/8" compression to 3/8" male NPT fitting for water
valve.
• Suggested water line size 3/8" O.D. copper or
equivalent.
ELECTRICAL SUPPLY:
• 120 volts, 60 Hz protected by a GROUNDED 15 amp
fuse or comparable circuit breaker.
• Max amperage draw 12.0 amps.
• Minimum wire size 14 gauge (No. 12 wire preferred) -
Copper only. Check all local codes.
• Individual branch circuit serving only dishwasher
recommended.
• Electrical and water supplies should enter cabinet
opening on the floor, or through the side walls as shown
in shaded areas of drawing
• IMPORTANT: A LWAYS CHECK LOCAL AND NATIONAL
CODES FOR FULL COMPLIANCE
See page 2 for additional information
www.dexpress.com
DIMENSION EXPRESS
Fax on Demand (775) 833-3600
• Dimensions (Actual Size) •
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
24" Dishwashers:
MDB6650AWQ, MDB6650AWW, MDB6650AWB and
MDB6650AWS
• Product Model Number (s): •
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter-
mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.
This Data Sheet Includes Information On
BN • A307B149 • • 032603 • 95656 • 19438
• Additional Information •
307
Maytag