Setting up your machine – MBM Corporation FMM3 User Manual
Page 7
Advertising
Setting Up Your Machine
Chip Bag
Page 06
Step #4
Attach the Chip Bag (FMM6-650A) to the machine by
stretching the mouth of the bag over the Master Chip
Chute and hooking the aluminum bar onto the bracket
located on the top flat portion of the master chip chute as
shown. Please note that you must empty this bag as
needed to avoid clogging.
Electrical Start Up
Step #5
Making sure that nothing is interfering with the drill bits,
plug the cord set into a grounded 115V outlet. To turn
the machine on, press the Rocker Switch on the front of
the shroud.
Master Chip Chute
Chip Bag
Rocker Switch
Power Cord
Advertising