MBM Corporation IM 8100 - Manual (Page 5)

3. Control Panel
-On-line: When the pressure sealer is connected to the printer.
-Off-line: When the pressure sealer is not connected to the printer.
-Counter: Set counting at off-line mode.
Not available in on-line mode.
-Set: Stores the selected function.
-Thickness: Detects double feeds and stops the unit.
Not available in on-line mode
-Jam free: Removes paper jam in the folding cassette.
-Alarm: Indicates an error or a jam
-Start/Stop: Starts or stops operation.
-Display: Displays the unit’s current status.
★ In order to use IM8100 as an Off-Line machine without the printer interface. please perform the following
procedures to change the mode to an off-line mode. Make sure to remove "Interface and Interface Top Guide"
1. Press the “set/store” button for 3 seconds to change the setup mode.
2. Press the “set/store” button 3 times and the Online mode will be on display.
3. Press the select button (◀▶) to change the mode to an Off-line mode.
4. Press the “start/stop” button to accept the change and the machine will be ready.
5. ** Press and hold down Mode button to temporary switch the mode from an online to an offline mode.
the machine will go back to On-Line mode after machine turn off.
★ Changing from an offline to an online mode by pressing the mode button is only supported
when the setup mode is in an online mode (Step # 5).
5