Programming additional transmitters, Battery replacement – Dodge 2008 JS Avenger Sedan User Manual

Page 28

Advertising
background image

PROGRAMMING ADDITIONAL TRANSMITTERS

Refer to SENTRY KEY

“Sentry KeyProgramming.”

If you do not have a programmed transmitter, contact
your authorized dealer for details.

BATTERY REPLACEMENT

The recommended replacement battery is CR2032.

NOTE:

Perchlorate Material — special handling may

apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

1. With the transmitter buttons facing down, use a flat
blade to pry the two halves of the transmitter apart. Make
sure not to damage the seal during removal.

2. Remove and replace the batteries. Avoid touching the
new batteries with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.

3. To assemble the transmitter case, snap the two halves
together.

Separating Transmitter Halves

26

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: