Dual XNAV3500P - Manual (Page 24)

XNAV3500P PORTABLE GPS NAVIGATION SYSTEM
22
Working with the Map
To load a map that is on the currently inserted memory card, proceed as follows:
1. From the the MAIN SCREEN, tap the Map button. The AVAILABLE MAPS screen appears:
2. Tap the desired map, then tap Ok.
3. The unit will prompt for a restart anytime maps are changed. Tap OK.
After the selected map is loaded, the main menu appears. Tap the NAVI icon to begin.
Icons
The following icons are displayed on the map:
Tap the Zoom/Scroll icon or to switch between Zoom and Scroll mode.
Zoom
In Zoom mode (the icon appears white) you may scale the map size up or down. Zoom in by
selecting a rectangular area on the map, beginning with the upper left corner. Zoom out by
beginning with the lower right corner.
Scrolling
In Scroll mode (the icon appears red) you may scroll the map. Tap on the screen and drag to
the desired direction.
Itinerary planning
This icon is active when a calculated itinerary is loaded. Tap the Itinerary icon to display the
whole itinerary. Tapping this icon again will display the previous map view.
Map in driving direction/north oriented
Tap the In driving direction/North oriented icon / to switch between the two
available modes of map orientation (North orientation or orientation in driving direction).
North orientation
Tap this icon to orientate the map north up (the icon appears white).
In driving direction
Tap this icon to orientate the map in driving direction (the icon appears red).