Measurement Computing DaqBook 2000 Series Installation - Manual (Page 14)

B-6 Connecting a DaqBook/2000E or WaveBook/516E to the Ethernet 969596 Section B
STEP B.5 - Configure the Computer’s Network Settings [Applies to “dedicated networks” only]
If using a LAN (Local Area Network), skip this section and continue with
Configure and Test the System using the Daq*Configuration Applet (page B-9).
1. Open the Control Panel by navigating from the Windows Desktop as follows:
Start Menu ⇒ ⇒ ⇒ ⇒ Settings ⇒ ⇒ ⇒ ⇒ Control Panel.
2. Double-click the “Network and Dial-up Connections” icon.
3. Double-click the “Network Connection” icon for the network that the DaqBook/2000E or the
WaveBook/516E is connected to.
Local Area Connection Status
4. In the “Local Area Connection Status” box (previous figure), click on the <Properties> button.
The “Local Area Connection Properties” box will appear (following figure).