Measurement Computing DBK200 - Manual (Page 2)

DBK200, pg. 2 989494 DBK Option Cards and Modules
The following illustration and the actual board silkscreen are the only references you should need to make
proper connections.
Connection tips:
• Ensure power is removed from the device(s) to be connected.
• Observe ESD precautions when handling boards and making connections.
•
P1 is used for ANALOG I/O.
• P4 (100-pin connector) connects to either the DaqBook/2000 Series device’s, the
DaqBoard/2000 Series board’s or cPCI DaqBoard/2000c Series board’s P4 connector
via a CA-195 Cable.
Be sure to align the P4 orientation indicators (Œ) prior to mating the P4 connectors.
Connecting a DBK Card to a DaqBoard/2000 Series Board via a DBK200