Dual XHD7714 - Manual (Page 8)

8
XHD7714 OPERATION
Press ESC to exit any menu adjustment mode.
Press AUD•MENU momentarily to select between Volume
(default), Bass, Treble, Balance, Fader, Subwoofer and
Source Volume Level.
Press AUD•MENU until BASS appears, then press SELECT
to confirm. Rotate volume left/right to adjust (-6 minimum /
+6 maximum).
Press AUD•MENU until TREBLE appears, then press
SELECT to confirm. Rotate volume left/right to adjust ( -6
minimum / +6 maximum).
Note: Any adjustment to the Bass or Treble settings
automatically cancels the current EQ curve (if one is
selected).
Note: Bass and Treble settings are retained for each mode
individually.
Press AUD•MENU until BALANCE appears, then press
SELECT to confirm. Rotate volume left/right to adjust (BAL L
12-BAL 00-BAL R 12). BAL 00 represents equal balance.
Press AUD•MENU until FADER appears, then press SELECT
to confirm. Rotate volume left/right to adjust (FAD F 12-FAD
00-FAD R 12). FAD 00 represents equal fader.
Press AUD•MENU until SUB-W appears, then press
SELECT to confirm. Rotate volume left/right to adjust (0-12).
Adjusting levels to 0 turns the subwoofer off.
The source volume level control allows a gain adjustment
for each audio source: AM, FM, CD, AUX, USB and Bluetooth.
Set the source volume level for each mode, depending on
the relative volume of each audio source.
To set the source volume level, press AUD•MENU until
SOURCE LEVEL appears. After one second, the current
mode will appear on the display. Turn the volume knob to
adjust the audio level of the current source (-6 minimum/+6
maximum).
Note: Only the current mode will be available for adjustment.
To adjust another mode of operation, press MODE until the
desired mode is selected, then set the source volume level
for that mode.
Escape
Audio
Bass
Treble
Balance
Fader
Subwoofer
Source Volume Level
General Operation
BASS VOLUME TREBLE BALANCE FADER SUBWOOFER SOURCE LEVEL