Meinberg SyncBox PTPv2 - Manual (Page 15)

Configuration: Ethernet
In the network configuration all parameters related to the network interfaces can be
changed. In the first section you can change the hostname and domain name. You can
also specify two nameserver. In the nameserver fields you have to enter an IPv4.
IPv4 addresses and DHCP
IPv4 addresses are built of 32 bits, which are grouped in four octets, each
containing 8 bits. You can specify an IP address in this mask by entering four decimal
numbers, separated by a point “.”.
Example: 192.168.10.2
Additionally you can specify the IPv4 netmask and your default gateway address.
Please contact your network administrator, who can provide you with the settings
suitable for your specific network.
15