Methven Tahi Satinjet Shower System - Manual (Page 10)

16 17 18
Place footrest and mark holes.
Drill clearance in lining and pre-
drill support
Set footrest aside, drill clearance
into lining then pre-drill support
Seal holes. Drive in screws
(and wall plugs if appropriate).
Clip on cover with the tab at top
as shown
Seal holes. Attach footrest cap.
Drive in screws (and wall plugs if
appropriate). Clip on cover
Attach hose & insert trays. Adjust
shelf position & handset tension,
see overleaf for instructions
8