Metro Mounting Post to Dolly - “B” PLATE CASTER - Manual (Page 2)

aSSEMbLy INSTrucTION FOr
MOuNTING POST TO DOLLy -
“c” PLaTE caSTEr
1. Remove and discard the existing leveling bolt
that comes with the post (Super Erecta only).
2. Mount “C” plate casters as shown with the
caster hardware provided.
3. Align the bottom of the posts (threaded insert
(SES) or levelling foot (MetroMax & MetroMax
Q) over the large holes in “Z” channel frame.
(Make sure levelling feet for MetroMax &
MetroMax Q are screwed all the way in before
assembling).
4. Place a flat washer and lockwasher onto a
3 /
8
-16 x 2 3 /
4
" hex head bolt (all provided in
the dolly hardware bag) and insert thru the
underside of the dolly thru caster and “Z”
channel frame, and into the post as shown.
Make sure that the washers are positioned
as shown.
5. Tighten all bolts securely as required.
NOTE:
This assembly instruction
applies to “C” plate casters
only — please see reverse side
for “B” plate applications.
caSTEr harDwarE
3 /
8
DIa. LOcKwaShEr
“Z” chaNNEL
LarGE hOLES IN caSTEr PLaTE
3 /
8
-16 x 2 3 /
4
" LG. hEx hEaD bOLT
SMaLL hOLES IN caSTEr PLaTE
3 /
8
DIa. FLaT waShEr
“u” chaNNEL
buMPEr
“c” PLaTE caSTEr
®
InterMetro Industries corporation
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
POST – SuPEr ErEcTa,
METrOMax Or METrOMax Q
(SuPEr ErEcTa ShOwN)
ThrEaDED INSErT (SES)
Or ThrEaDED LEvELEr
(METrOMax & METrOMax Q)