Metro MetroMax i One-Piece Undershelf Slide - Manual (Page 3)

5. Insert screws up through the slide
and hangers. Thread nuts onto the
screws. Do not tighten.
6. Install the mat (or mat section) to
the frame. The hangers must fit
between the mat ribs (Fig. 3). Adjust
slide position if necessary.
Fig. 3
7. Remove mat(s). Make certain that
the slide is straight front to back on
the framework, then tighten all
hardware. Replace mat(s) (Fig. 4).
Fig. 4
8. Take the tote box and insert it into
the slide (Fig. 5).
Fig. 5
THIS COMPLETES THE
ASSEMBLY OF THE ONE-PIECE
UNDERSHELF SLIDE.