Metro Filler-Kit Overhead Units - Manual

Part No. INST-OHFLR
Date: 10/09/01
WORKCENTERS
INSTALLATION
INSTRUCTIONS
Filler Kit – Overhead Units
1. Secure Overhead to wall by following the steps
outlined in the Starsys Overhead Installation
Manual (shipped in each Overhead Unit).
2. Remove tape from back of filler extrusion and
align filler strip to Overhead Unit.
3. Apply pressure to filler to assure a firm adhesion.
Note: Filler Kits can be trimmed, punched, drilled or
scribed to accommodate utilities and wall profiles as
needed.