Connections – Denon DRA-37 User Manual
Page 8
Audio cable
Getting Started
5
ENGLISH
Number buttons
(0 ~ 9, +10) ··········(12, 14, 17)
MODE button············(12, 16)
MEMORY button ············(12)
TUNING buttons ············(12)
Input source selector
buttons ····························(10)
Power buttons ················(20)
Memory block
buttons (A ~ G)···············(12)
[ Rear ]
NOTE:
• If buttons on the front or rear are pressed strongly, the button on the opposite side will be activated
too.
Cable indications
The hookup diagrams on the subsequent pages assume the use of the following optional connection
cables (not supplied).
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.
Connections
Analog connections (Stereo)
A
R
L
R
L
Pin-plug cable
(White)
(Red)
Speaker connections
C
Speaker cable
Analog connections (Monaural, for subwoofer)
B
Pin-plug cable
Video connections
D
Video cable (75 Ω/ohms video pin-plug cable)
(Yellow)
BAND button ··················(12)
Signal direction
Audio signal
OUT
IN
IN
OUT
Video signal
OUT
IN
IN
OUT
ENGLISH