Daewoo DT-42A1 - Manual (Page 57)

Comopnent 1
PM 12:00
PR22 PR Name
Mono/Stereo Time
PR22 PR Name
Mono PM 12:00
AV1
PM 12:00
Component 1
PM 12:00
- Press the [RECALL] button on the remote control, then displays basic informations of the current input signal,
Under this state, pressing the [RECALL] button once more, additional informations about the current input signal
will be displayed on the OSD.
H:1920
V:1080
[RECALL] button
[RECALL] button
once more
H:1920
V:1080
Video PAL B/G
Audio I
Country GB
Channel C35
Video PAL B/G
58
Press the RECALL Button.
• Press the [RECALL] button on the Remote Control.
1
Checking the Current Input Signal Checking the Current Input Signal
• Used to check the
INPUT signal mode,
current time,
resolution, channel,
etc.
Checking the
Current Input Signal
1. If you watch Component, PC, or DVI :
Displays which input terminal is used, and indicates the
input signal mode.
Indicates the horizontal and vertical resolution of the
current INPUT signal.
Indicates the mode and current time.
2. If you watch TV:
Displays the program number and its name.
Indicates the current sound state and time.
Displays additional informations of TV signal of TV signal,
video and audio system. country, channel.
3. If you watch VCR image:
Displays the program number and input terminal, which is used.
Indicates the mode and current time.
Displays the video system of input signal
NOTES:
1) “1920 x 1080” displayed in the INPUT signal is not the
resolution of the monitor, but the signal that is sent by the
Digital Broadcasting Receiver.