MicroLinks PRO10 - install manual - Manual (Page 5)

Microscope Installation Manual http://www.ViTiny.com
5
Copyright © 2008-2011 MicroLinks Technology Corp.
2. Install Microscope application program
Please select the Fig 1-1 Install program and setup application program button to install
Microscope program.
2.1
Install application program
2.1.1 Start setup program
Click setup application program, after it will pop up (please select a language) window on
Fig.2-1, the initial language will follow up the pc OS system. If you want to cancel setup please
click “Cancel” then click “OK”.
Fig. 2-1 setup language window
2.1.2 Welcome to the Microscope Setup Wizard
After choosing the language, go to welcome to the Microscope setup wizard window see
Fig.2-2, then please click “Next” then continue. If want to cancel please click “Cancel” button.
In the folloing figs, “name” represents Microscope’s application program name,
“X.XXX.XXXx” represents the application program version.