MK Products CobraTurn Digital Turntable - Manual (Page 12)

CobraTurn ™ Digital Turntable Owner's Manual - Page 5
005-0746
Heavy Duty
Variable Speed Foot Control
(optional)
005-0747
On/Off Foot Switch
(standard)
005-0040
3-Jaw Chuck
(optional)
005-0677
10" Turntable
(optional)
Section C Accessories
Kits
Additional Display Messages
• nEE: This means the turntable memory was not set or lost. Power cord
needs to be unplugged to reset. If this error persists, please contact MK
support.
• bAd: This message is displayed for about 3 seconds and default settings
are restored and self-testing continues. WARNING: The turntable SHOULD
be recalibrated.
• CAL: If the display shows "CAL", the hardware calibration needs to be
performed (never calibrated or corrupted).
NOTE: Calibration requires special setup.
Contact MK Products for details.