Mogar Music WINTUBE - Manual (Page 12)

5. APPLICATIONS
5.1 During recording.
Every time you are recording your goal is to achieve a natural sound image of high
quality in the first place. Any reverb, chorus, delay or other effects can be add later
during the mixdown, without affecting the recorded material. First of all set a gain level
that suits the input material by moving the GAIN control of the desired channel. Than
be sure to take all measures that enable you to achieve the best sound possible: verify
the microphone position in the room to match the result you need in consideration to
the room acoustic. Than, if required, set the Limiter Threshold control on the back panel
of the device to prevent recorder clipping. Now you can start recording.
5.2 Live situations.
Of course both WIN-TUBE and WIN-PRE are the perfect choice as the first ring of your
audio chain also in live performances. In this case you can in fact improve the quality of
the sound of your microphone or of your acoustic instrument by the use of these
preamplifiers before the input of your mixer. Follow the some suggestions sow for
recording setting in chapter 5.1 concerning Gain and Limiter Threshold setting.
12 – WIN PRE & WIN TUBE USER’S
MANUAL