Troubleshooting – Desa CGESBL User Manual

Page 9

Advertising
background image

www.desatech.com

117190-01A

9

TROUBLESHOOTING

WARNING: Turn off appliance and let cool before servicing. Only

a qualified service person should service and repair heater.

POSSIBLE CAUSE

REMEDY

OBSERVED PROBLEM

1. Stove has overheated and safe-

ty devise has cause thermal

switch to disconnect or home

circuit breaker has opened

1. Loose wiring

2. Flame motor defective

1. Bulb(s) are burnt out

2. Wiring is loose

1. Bulb(s) are burnt out

1. Flame motor is defective

1. Low batteries

2. Unit switch and/or wall

switch in ON position

Stove turns off and will not

turn on

Flame is not moving

Dim or poorly visible flame

Log set and/or ember is not

glowing

Flame sputters

Remote control does not work

1. Reset switch by turning main

power switch off and waiting 5

minutes then turning it back on

1. Inspect wiring for loose con-

nections

2. Call a qualified service techni-

cian to replace flame motor

1. Inspect bulbs and replace if

necessary

2. Inspect wiring for loose con-

nections and repair or replace

if necessary

1. Inspect bulbs and replace if

necessary

1. Call a qualified service techni-

cian to replace flame motor

1. Replace AA batteries in re-

mote control

2. Turn off main power switch

(see Figure 3)

Advertising