Motion Sound KM-12 - Manual

1
KM-12
-WARNING-
The KM-12 can produce high sound pressure levels. Hearing protection is advised. The
KM-12 MUST be earthed and connected to a correct power source.
-SPECIFICATIONS-
Design Range:
Instrument Inputs: 300 MV - 4 Volts RMS
Microphone Input ¼”: 200 UV – 2 Volts RMS
Microphone Input XLR: 100 UV – 1 Volt RMS
Power Amplifier: 100-watt RMS
Speakers:
One 12” 250-watt Eminence Beta, 8 ohms
80-watt 3.5X3.5 Ferro cooled dynamic horn, 8 ohms
Dimensions:
18” W 15”H 12”D Weight 28 lbs.
Fuse (Slo-Blo)
Power: US 117VAC 50/60 Hz 100 watt 2 amp
Europe 230 VAC 50/60 Hz 100 watt 1 amp
Japan 100 VAC 50/60 Hz 100 watt 2 amp
Fuse Location: The fuse is located in the power inlet module.
Use only recommended fuse rating!
Finish:
Two part Polymaric
™ tough polymer finish on MDF