MovinCool Classic 40 - Manual (Page 5)

5
FOREWORD
Congratulations on purchasing the MovinCool spot cooling system. This manual
explains how to assemble, install and operate the MovinCool Classic 40, and
Classic 60 spot cooling system. Please read this operation manual thoroughly to
familiarize yourself with the features of the unit and to ensure years of reliable
operation.
You may also find it useful to keep this operation manual on hand for reference.
Components and/or procedures are subject to change without prior notice.
Definition of Terms
WARNING: Describes precautions that should be observed in order to
prevent injury to the user during installation or unit operation.
CAUTION: Describes precautions that should be observed in order to
prevent damage to the unit or its components, which may occur during
installation or unit operation if sufficient care is not taken.
Note: Provides additional information that facilitates installation or unit operation.
GENERAL WARNINGS & CAUTIONS
1. All electrical work, if necessary, should only be performed by qualified
electrical personnel. Repair to electrical components by non-certified
technicians may result in personal injury and/or damage to the unit. All
electrical components replaced must be genuine MovinCool parts, purchased
from an authorized reseller.
2. Installation should be conducted by a qualified technician only. DENSO and
DENSO affiliates are not responsible for injuries and/or damages caused by
improper installation.
3. Never fold or place heavy objects on the power cord.
This could result in damage to the power cord causing electrical shock or fire.
4. Do not place water or any other liquid on the unit. This can cause damage to
the unit and increase the risk of electrical shock.
5. Do not sit or stand on the unit.
6. Do not place hands or any object in the cool air outlet or exhaust duct.
Touching the fan, which is rotating at a high speed, is very hazardous.