MultiDyne SilverBack II - Manual (Page 5)

-2-
FEATURES and OPERATION
Milled from a solid block of aluminum, the SilverBack-II measures just over 1-inch thick, and
providing camera operators with a compact, unobtrusive camera-backed system for remote
signal transmission.
MultiDyne includes integrated dovetails on the top and bottom of the unit that you can use
with optional accessories, such as 15-mm iris rod adapters. This innovative feature is
extremely useful for the next generation of small-sized cameras that do not have professional
battery mounts or a method for shoulder use.
Refer
APPENDIX A for Pin-Out details.
The following list shows SilverBack II features:
•
All signals on ONE Cable
• Bi-Directional 3G-SDI
• 10km Operation
• Intercom with IFB/PGM inject
• Optional SDI Send for dual stream/3D
• 2 MIC inputs with phantom and pre-amps
• Accepts Anton-Bauer and “V-mount” Battery plates
• Integrated Tally lamps
• Camera RCP Control
• 1 additional Data path (232/422)
• 2 GPIO’s
• Integrated swivel for optical connector
• Top-mounted taps for mounting viewfinder
• Optional 15mm Iris Rod bracket for mounting flexibility
• Lightweight, low-profile packaging