DYSON DC03 - Manual (Page 4)

Bin emptying and brushbar
If ratchet warning noise continues, stop
vacuuming, turn off the machine and
unplug. To free the brushbar, lie the
machine on its front to reveal the soleplate.
1 2
3
4 Using a coin, undo the three yellow
fasteners.
Push bin release catch forward to free
the bin.
Wrap a plastic bag firmly around the
rim of the clear bin and empty (wait
ten seconds to allow dust to settle).
To clean bin, wash in warm water. Do
not remove bin inner and seals, and
ensure bin is dry before reassembling.
3
4
Push Cyclone release catch forward to
free Cyclone assembly.
Pull Cyclone assembly away from the
machine.
1
To replace brushbar, align and locate
in slots. Rotate until the end caps click
into place. Rotate brushbar to allow belt
to centralise, then replace soleplate.
5
1 2 3
1 2 3 4
Do not fill bin above maximum line.
4 5
Keep small holes
clear of dust and fluff.
2
Optional
DYSON CUSTOMER HELPLINE: 0990 275104
8am to 8pm, 7 days a week
If the brushbar is obstructed, a loud ratchet warning noise will be heard. Pull the cleaner away and it will automatically re-set itself.
For thread removal, unplug cleaner and carefully cut away threads from brushbar.
End cap of brushbar
Raised section
Remove soleplate and clear the
brushbar obstruction.