Nevion ARC-SD-DMUX - Manual (Page 26)

ARC-SD-DMUX Rev. B
nevion.com | 26
Block Blk
#
Commands Example Response Control
misc 0 - STATUS NOT
AVAILABLE BY
COMMAND,
ONLY FOUND in conf
0 AND info
RESPONSES! prog | fin
' ' | ovr Misc info
prog if the card is freshly
programmed by the boot loader and
the program is still un-finalized. fin is
the normal condition.
ovr if DIP-switch 16 is set to the ON
position and the card is under DIP-
switch control.
Note 1: The info part of misc has
additional functionality when locate is
used: locating <remaining seconds>.
This enables a visible countdown
clock in Multicon GYDA, but is not a
required part of FLP400.