Nevion HDSDI-CHO-2x1 - Manual (Page 10)

HDSDI-CHO-2x1 Rev. G
nevion.com | 10
5.2 Front panel - Status monitoring
The status of the module can be easily monitored visually by the LED’s at the front of the
module. The LED’s are visible through the front panel as shown in the figure below.
Figure 8: indicator overview for HDSDI-CHO-2x1;
(Text not printed on the front panel)
The HDSDI-CHO- 2x1 has 4 LED’s each showing a status corresponding to the GPI pinning.
The position of the different LED’s is shown in the figure above.
Diode \ state Red LED Yellow LED Green LED No light
Status Module is faulty Module is OK;
Module power is
OK Module has no
power
Lock&LOS Loss Of Signal &
No Reclocker
lock Signal present &
No Reclocker
lock Signal present &
Reclocker in lock
Input 1 No input signal
on Input 1 Signal present &
not selected Signal present &
Input 1 selected
Input 2 No input signal
on Input 2 Signal present &
not selected Signal present &
Input 2 selected