Nevion DA-AA - Manual (Page 13)

DA-AA Rev. 6
nevion.com | 13
7 Interface with GYDA and RS-422 command set
All commands follow the Flashlink protocol and can be used for direct control access to the
module. The control system can either be a GYDA-SC or a third-party control system with
integrated Flashlink protocol. The module can also be manually controlled with a VT100
compatible terminal program.
The protocol can be found on our web page: http://www.nevion.com
7.1 DA-AA Command table
Table 4
Command Response Comment
? See protocol description The “hello” command
Info Module status
information
Status Give module status